Garmin Software Version 0424.01 Uživatelská příručka Strana 77
- Strana / 130
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
63
SECTION 4 – MFD
TIS Symbology
TIS traffic is displayed on the Traffic Map Page accord-
ing to TCAS symbology. A Traffic Advisory (TA) symbol
is displayed as a solid yellow circle (or half circle on the
outer range ring if the traffic is outside the range of the
dedicated traffic page). All other traffic is displayed as a
hollow white diamond. Altitude deviation from the user’s
aircraft altitude is displayed above the target symbol if
they are above own aircraft altitude, and below the sym-
bol if they are below own aircraft altitude. Altitude trend
is displayed as an up arrow (+500 ft/min), down arrow
(-500 ft/min), or no symbol if less than 500 ft/min rate in
either direction. Other symbols:
• Other Traffic – this symbol represents traffic
detected within the selected display range that
does not generate a TA.
• Traffic Advisory (TA) – this symbol is generated
when traffic meets the advisory criteria described
previously.
• Traffic Ground Track is indicated on the Traffic
Map Page by a “target track vector”. The track
vector line is projected from the traffic advisory
symbol and is drawn at any angle necessary to
represent the current track of the traffic advisory
data.
Item Symbol
Traffic
Proximate Traffic
Traffic Advisory, Out of Range
Traffic Advisory
Traffic Map Page Operations
Power-Up Test
The TIS interface performs an automatic test during
power-up. If the system passes the power-up test, the
standby screen is displayed on the Traffic Map Page. If the
system passes the power-up test, and the aircraft is air-
borne, traffic is displayed on the Traffic Page in the operat-
ing mode.
If the system fails the power up test, the ‘NO DATA’,
‘DATA FAILED’, or ‘FAILED’ message is displayed. Con
-
tact your Mooney service center or Garmin dealer for cor-
rective action if the ‘DATA FAILED’, or ‘FAILED’ message
is displayed. The ‘FAILED’ message indicates the GTX
33 transponder has failed. The ‘DATA FAILED’ message
indicates data is being received from the GTX 33 but a
failure was detected in the data stream. The ‘NO DATA’
message indicates that data is not being received from the
GTX 33.
Changing the Map Range
To change the map range:
1. Turn the joystick clockwise to zoom out, or turn
the joystick counter-clockwise to zoom in. Map
ranges are 2 nm, 6 nm, and 12 nm.
NOTE: Traffic Information Service (TIS) is not
available in all areas.
- COPYRIGHT 3
- RECORD OF REVISIONS 4
- TABLE OF CONTENTS 6
- Appendix A 97 7
- Index 111 7
- LIST OF FIGURES 8
- LIST OF TABLES 10
- WARRANTY 11
- WARNINGS & CAUTIONS 12
- SECTION 1: INTRODUCTION 15
- 1.1 G1000 CONTROLS 16
- SECTION 1 – INTRODUCTION 17
- 1.2 SECURE DIGITAL CARDS 18
- 1.3 SYSTEM POWER-UP 18
- PFD Power Up 19
- MFD Power Up 19
- 1.4 INITIAL OPERATIONS 20
- 1.5 BACKLIGHTING 20
- 1.6 REVERSIONARY MODE 20
- SECTION 2: PRIMARY FLIGHT 23
- SECTION 2 – PFD 24
- 2.1 BACKLIGHTING 26
- 2.2 SOFTKEY FUNCTION 27
- Airspeed Indicator 31
- Attitude Indicator 32
- Altimeter 34
- Marker Beacon Annunciations 36
- Vertical Speed Indicator 37
- Navigation Frequency Window 42
- Navigation Status Bar 43
- Transponder Status Bar 44
- SECTION 3: AUDIO PANEL 45
- SECTION 3 – AUDIO PANEL 46
- Microphones 47
- Mono/Stereo Headsets 47
- Unmuted/Unswitched Inputs 47
- Power-up Settings 48
- Fail-safe Mode 48
- Selecting Keys 48
- Deselecting Keys 48
- Lighting 48
- Transceiver Keys 49
- Pressing a COM MIC Key 49
- Pressing a COM Key 49
- Keying a Microphone 49
- COM Swap 50
- Split COM 50
- PA Function 50
- Split COM and PA 51
- Speaker Output 51
- Description and Operation 52
- 3.4 RADIO INPUTS 54
- PILOT Mode 55
- COPILOT Mode 55
- CREW Mode 55
- ALL Mode 55
- 3.6 VOLUME/SQUELCH CONTROL 56
- Intercom VOL/SQ State 57
- 3.7 DISPLAY BACKUP MODE 58
- SECTION 4: MULTI FUNCTION 59
- DISPLAY 59
- Manifold Pressure Gauge 61
- Tachometer 61
- Fuel Qty Indicator 61
- 4.3 MFD PAGE GROUPS 64
- Working With Menus 65
- 4.4 NAVIGATION MAP PAGE 66
- MFD Navigation Status Window 73
- Navigation Map Page Menu 74
- 4.5 TRAFFIC MAP PAGE 75
- TIS Symbology 77
- Traffic Map Page Operations 77
- 4.6 WEATHER MAP PAGE 80
- Weather Map Page Operations 81
- 4.7 TERRAIN PROXIMITY PAGE 82
- Displaying Obstacle Data 83
- 4.8 DIRECT-TO NAVIGATION 84
- Active Flight Plan Page 89
- FLIGHT PLAN CATALOG PAGE 92
- Arrivals and Departures 96
- Approaches 97
- Selecting Approaches 98
- GPS Approach Examples 100
- SECTION 4 – MFD 101
- A.1 INTRODUCTION 111
- A.2 ALERT LEVELS 112
- Audio Alerts 113
- Voice Alerts 113
- APPENDIX A 114
- Database Message Advisories 118
- GMA 1347 Message Advisories 118
- GIA 63 Message Advisories 119
- GEA 71 Message Advisories 121
- GTX 33 Message Advisories 121
- GRS 77 Message Advisories 122
- GMU 44 Message Advisories 122
- GDC 74A Message Advisories 123
Související produkty a manuály pro Navigátory Garmin Software Version 0424.01
Navigátory Garmin GPSMAP 296 Uživatelský manuál
(2 stránky)
(2 stránky)
Navigátory Garmin GPSMAP 4212 Uživatelský manuál
(84 stránky)
(84 stránky)
Navigátory Garmin SA01535Wi_D Manuál
(314 stránky)
(314 stránky)
Navigátory Garmin Appliance Data Uživatelský manuál
(26 stránky)
(26 stránky)
Navigátory Garmin Monterra Prohlášení o shodě
(6 stránky)
(6 stránky)
Navigátory Garmin SA01535Wi_D Manuál s instrukcemi
(308 stránky)
(308 stránky)
Navigátory Garmin 20 Uživatelský manuál
(20 stránky)
(20 stránky)
Navigátory Garmin GPS 38 Uživatelský manuál
(68 stránky)
(68 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.024 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce