Garmin Software Version 0424.01 Uživatelská příručka Strana 26

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 25
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
12
SECTION 2 – PFD
2.1 BACKLIGHTING
The backlighting of the display and the keys can be
adjusted for the PFD and MFD. The backlighting inten
-
sity ranges from 0.14% to 100.00%. Two modes exist for
adjustment:
Auto - The G1000 adjusts the backlighting auto-
matically with reference to the amount of light in
the cockpit (default setting).
Manual - Allows the pilot to manually adjust the
backlighting.
NOTE: Except in reversionary mode, the back-
lighting can only be adjusted from the PFD.
NOTE: No other window can be displayed in the
lower right corner of the PFD when the MENU
key is pressed to change the backlighting.
To manually adjust the backlight for the
PFD and MFD:
1. Press the
MENU
key on the PFD to display
the PFD Setup Menu window. AUTO’ is now
highlighted next to ‘PFD DSPL’.
2. Turn the
small FMS
knob to display the selec-
tion window. Turn the
FMS
knob to select
‘MANUAL’, then press the
ENT
key.
3. With the intensity value now highlighted,
turn the
small FMS
knob to select the desired
backlighting, then press the
ENT
key.
4.
Turn the large FMS knob to highlight AUTO’ next
to ‘MFD DSPLand repeat steps 2 and 3. Press
the
CLR
or
MENU
key to remove the window.
To manually adjust the backlight for the
PFD and MFD keys:
1. Press the
MENU
key on the PFD to display
the PFD Setup Menu Window.AUTO’ is now
highlighted next to PFD DSPL.
2. Turn the
large FMS
knob to highlight PFD DSPL.
Turn the
small FMS
knob in the direction of the
green arrow to display PFD KEY.
3. Turn the
large FMS
knob to highlight ‘AUTO’.
Turn the
small FMS
knob to display the selec-
tion window. Turn the
FMS
knob to select
‘MANUAL’, then press the
ENT
key.
4. With the intensity value now highlighted,
turn the
small FMS
knob to select the desired
backlighting, then press the
ENT
key.
5. Turn the
large FMS
knob to highlight MFD DSPL
and turn the
small FMS
knob in the direction of
the green arrow to display MFD KEY. Repeat
steps 3 and 4. Press the
CLR
or
MENU
key to
remove the window.
Figure 2-3 PFD Setup Menu
Zobrazit stránku 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 129 130

Komentáře k této Příručce

Žádné komentáře