Garmin Software Version 0424.01 Uživatelská příručka Strana 40

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 39
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
26
SECTION 2 – PFD
Bearing Pointers and Information Windows
There are 2 bearing pointers available, 1 or 2 can be
displayed on the HSI. Pressing the PFD softkey provides
access to the BRG1 and BRG2 softkeys. BRG1 pointer is
a single cyan (light blue) line with an open arrowhead at
the end. BRG2 pointer is a double cyan (light blue) line
with an open arrowhead at the end. The bearing point
-
ers never override the CDI. When one or more bearing
pointers are displayed (but not necessarily visible if there
is no data available), a white ring is presented around the
center of the compass rose to visually separate the bearing
pointer(s) from the CDI.
When a bearing pointer is displayed it’s associated
information window is also displayed. BRG1 informa-
tion window is displayed to the lower left of the HSI
and includes the bearing source (NAV1), a pointer icon,
frequency and distance (NAV1 and GPS) to the bearing
source. BRG2 information window is displayed to the
lower right of the HSI and includes the bearing source
(NAV2), a pointer icon, frequency and distance (NAV2) to
the bearing source.
If GPS is the bearing source, the active waypoint iden-
tifier is displayed in lieu of a frequency. If an active way-
point is not selected, the bearing pointer is removed from
the HSI and “NO DATA” is displayed in the information
window.
If the NAV radio is the bearing source and is tuned to
an ILS frequency, the bearing pointer is removed from the
HSI and the frequency is replaced with “ILS”. If the NAV
radio is not receiving the tuned VOR station, the bearing
pointer is removed from the HSI and the frequency dis-
played in the information window is replaced with “NO
DATA”.
When NAV1 or NAV2 is the selected bearing source,
the frequency is replaced by the station identifier when
the station is in range.
Bearing 1
Pointer
Bearing 1
Information
Window
Bearing 2
Pointer
Bearing 2
Information
Window
Figure 2-22 HSI with Bearing Information
Distance from
Waypoint
Waypoint
Identifier
Bearing
Source
Pointer
Icon
Figure 2-23 BRG1 Information Window
Distance from
Waypoint
Waypoint
Identifier
Pointer
Icon
Bearing
Source
Figure 2-24 BRG2 Information Window
Zobrazit stránku 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 129 130

Komentáře k této Příručce

Žádné komentáře