
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850/900
190-00708-05 Rev. C 17
Nav/Com/XPDR/Audio Panel
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Creating a Message
Creating a message consists of choosing from a pre-determined list of requests,
entering the required information, and sending the request.
To create messages:
1)
From the MFD, select the
CPDLC
Softkey.
2)
Select the
NEW
Softkey. The CPDLC Thread Window appears.
3)
With the Response/Request field highlighted, turn the small
FMS
Knob
to select the desired request from the list and press the
ENT
Key. For
discussion purposes, ‘Request [level]’ is selected.
4)
Highlight the Level field and enter the desired altitude. To toggle between
multiple units of measure (FT or FL), highlight the first numeric position and
turn the small
FMS
Knob counterclockwise.
5)
Press the
ENT
Key to complete the entry.
6)
Highlight the Reason field and enter the desired reason from the list.
7)
Press the
ENT
Key to complete the entry.
8)
Highlight the SEND Button and press the
ENT
Key.
Responding to an ATC Message
Responding to an ATC message consists of choosing from a pre-determined list
of responses or acknowledgements, then sending the response or acknowledgement.
To respond to a message:
1)
From the MFD, select the
CPDLC
Softkey.
2)
Turn the large
FMS
Knob to place the selection cursor over the desired
message and press the
ENT
Key.
3)
Turn the small
FMS
Knob to select the desired Response/Request from the
list and press the
ENT
Key.
4)
Highlight the SEND Button and press the
ENT
Key.
Komentáře k této Příručce