Garmin Software Version 0321.19 Uživatelský manuál stáhnout pdf (Strana 31)

FAA APPROVED AIRPLANE FLIGHT MANUAL SUPPLEMENT

GARMIN G1000 INTEGRATED AVIONICS SYSTEM

DIAMOND MODEL DA 40

DIAMOND MODEL DA 40 F

190-00492-11 Rev 8 Diamond DA 40 / DA 40F

3-9

3.8.2 AHRS FAILURE

NOTE

A failure of the Attitude and Heading Reference System (AHRS) is

indicated by removal of the sky/ground presentation and a red X and a

yellow “AHRS FAILURE” shown on the PFD. The digital heading

presentation will be replaced with a yellow “HDG” and the compass rose

digits will be removed. The course pointer will indicate straight up and

course may be set using the digital window.

1. Use Standby Attitude Indicator, magnetic compass and Navigation Map

2. Course ......................................................................Set using digital window

3.8.3 AIR DATA COMPUTER (ADC) FAILURE

NOTE

Complete loss of the Air Data Computer is indicated by a red X and yellow

text over the airspeed, altimeter, vertical speed, TAS and OAT displays.

Some FMS functions, such as true airspeed and wind calculations, will also

be lost.

1. Use Standby Airspeed Indicator and Altimeter

2. Land as soon as practical at a suitable airport

3.8.4 ERRONEOUS OR LOSS OF ENGINE AND FUEL DISPLAYS

NOTE

Loss of an engine parameter is indicated by a red X through the data

field. Erroneous information may be identified by indications that do

not agree with other system information. Erroneous indications may be

determined by comparing a display with other displays and other

system information.

1. Set power based on throttle lever position, engine noise, and speed.

2. Monitor other indications to determine the health of the engine.

3. Use known power settings from the AFM for approximate fuel flow values.

4. Use other system information, such as annunciator messages, ENGINE

SYSTEM page, and AUX – TRIP PLANNING page to safely complete the

flight.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Žádné komentáře

Garmin Software Version 0321.19 Uživatelský manuál Strana 31