906-1060-00Cylinder and BracketMounting InstructionsHonda 8 HP 1987-20001TR-1 Gold
ITEM PART NUMBER QTY DESCRIPTION1 130-0055-00 1 Carrier, Eye Mounting Bkt.2 130-1062-00 1 Bracket, Rod Eye Mounting3 130-1064-00 1 Assy., Cylinder Mtg
ITEM PART NO. QTY NAME31 330-1002-001 Rod Eye, 5/16-2433 310-0042-09 1 Hex Jam Nut 5/16-2434 340-0900-00 1 Cylinder35 321-0001-00 2 Fitting, Straight
Bracket InstallPlace the Rod Eye Mounting Bracket (item 2) as shown in gure 5 against the face of the Carrier (item 1). Install the Hex Cap Screws (i
Tighten Set ScrewsUsing your 3/32 hex key tighten rst the upper starboard set screw (in the Carrier) then the lower one. Remove Shock CoverUse the 12
Mounting The AngleReplace the washers on the last two screws removed with the star Lock washers (item 7).Put a little thread lock on the ends of them
Cylinder Rod EyePlace the Rod Eye (item 31) over the vertical pin in the Rod Eye Mounting Bracket (item 2) as shown. (Leave the cylinder attached.) Pu
Full Port & Starboard.Tilt the motor down. Turn the motor hard over to port. That will retract the Cylinder rod into the Cylinder. Check that the
Komentáře k této Příručce