
Garmin G1000 Cockpit Reference Guide for the DA42
190-00406-05 Rev. B
10-18
SECTION 10 – HAZARD
AVOIDANCE
Displaying Weather on the Weather Radar Page
1) Select the Map Page Group.
2) Select the Weather Radar Page.
3) Select the
MODE Softkey.
4) To select Weather Mapping Mode:
a) While on the ground, select the
STANDBY Softkey. A one-minute warm-up
period is initiated (countdown is displayed
on the screen). After the warm-up is
complete, the radar enters the Standby
Mode.
b) When the aircraft is airborne, select
the WEATHER Softkey.
OR:
a) While on the ground, select the
WEATHER Softkey. A confirmation window
is displayed (Figure 10-29).
b) Turn the small
FMS Knob to
highlight YES and press the ENT Key to
continue radar activation.
OR:
If the aircraft is airborne, select the
WEATHER Softkey. A one-minute warm-up
period is initiated (countdown is displayed
on the screen). After the warm-up is
complete, the radar begins transmitting.
5) Turn the Joystick to select the desired map range.
6) The horizontal scan is initially displayed (Figure
10-28). If desired, select the VERTICAL Softkey to
change to vertical scanning.
Figure 10-29 Confirming Activating Radar
Komentáře k této Příručce