
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-05 Rev. A
90
Annunciations & Alerts
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
GMC 710 MESSAGE ADVISORIES
Message Comments
GMC CONFIG
– GMC Config error.
Config service req’d.
GMC 710 configuration settings do not match
those of backup configuration memory. The
system should be serviced.
GMC FAIL
– GMC is inoperative. A failure has been detected in the GMC 710.
The GMC 710 is unavailable.
MANIFEST
– GMC software
mismatch. Communication halted.
The GMC 710 has incorrect software installed.
The system should be serviced.
GMC KEYSTK
– GMC [key name]
Key is stuck.
A key is stuck on the GMC 710 bezel. Attempt
to free the stuck key by pressing it several
times. The system should be serviced if the
problem persists.
MISCELLANEOUS MESSAGE ADVISORIES
Message Comments
FPL WPT LOCK
– Flight plan
waypoint is locked.
Upon power-up, the system detects that a
stored flight plan waypoint is locked. This
occurs when an aviation database update
eliminates an obsolete waypoint. The flight
plan cannot find the specified waypoint and
flags this message. This can also occur with
user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it
no longer exists in any database,
Or
update the waypoint name/identifier to reflect
the new information.
FPL WPT MOVE
– Flight plan
waypoint moved.
The system has detected that a waypoint
coordinate has changed due to a new aviation
database update. Verify that stored flight plans
contain correct waypoint locations.
TIMER EXPIRD
– Timer has expired. The system notifies the pilot that the timer has
expired.
Komentáře k této Příručce