
Garmin G1000 Cockpit Reference Guide for the Piper PA32
10-8
SECTION 10 – HAZARD
AVOIDANCE
10.5 SKYWATCH
®
TRAFFIC ADVISORY
SYSTEM (TAS)(OPTIONAL)
Refer to the SkyWatch pilot’s guide for a detailed
discussion of the SkyWatch system.
Displaying Traffic on the Traffic Map Page
1)
Turn the large
FMS
Knob to select the Map Page
Group.
2)
Turn the small
FMS
Knob to select the Traffic Map
Page.
3)
Press the
OPERATE
Softkey to begin displaying
traffic. ‘TAS OPERATING’ is displayed in the
Traffic Mode field.
4)
Press the
ALT MODE
Softkey to change the altitude
volume. Select the desired altitude volume by
pressing the the
BELOW
,
NORMAL
,
ABOVE
, or
UREST
(unrestricted) Softkey. The selection is
displayed in the Altitude Mode field.
5)
Press the
STANDBY
Softkey to place the system
in the Standby Mode. ‘TAS STANDBY’ will be
displayed in the Traffic Mode field.
6)
Rotate the
Joystick
clockwise to display a larger
area or rotate counter-clockwise to display a
smaller area.
Traffic, Out of
Range
Proximity Traffic,
1000’ above &
descending
Traffic Mode
Figure 10-12 Traffic Map Page
“Non-Bearing” Traffic (system
is unable to determine bearing),
distance is 8.0 nm, 1190’ above
and descending
Traffic Advisory,
aircraft is 400’ below
& climbing
Altitude Mode
Displaying Traffic on the Navigation Map
1)
Ensure the SkyWatch system is operating. With
the Navigation Map displayed, press the
MAP
Softkey.
2)
Press the
TRAFFIC
Softkey. Traffic will now be
displayed on the map.
Komentáře k této Příručce