Garmin Legacy Software Versions Uživatelská příručka stáhnout pdf (Strana 49)

190-00498-00 Rev. A Garmin G1000 Pilot’s Guide for Cessna Nav III

2-19

PRIMARY FLIGHT DISPLAY

DME Radio (optional)

The optional DME radio is a Honeywell KN63 remote-

mounted, 200-channel, 100-watt, all-solid-state digital

DME which provides distance information to the G1000.

Press the

PFD softkey followed by the DME softkey

to display the DME Information Window. The DME

Information Window is displayed above the BRG1

Information Window. The DME label, tuning mode

(NAV1, NAV2, or HOLD), frequency, and distance are

displayed in the DME Information Window. When a

signal is invalid, the distance is replaced by “–.– – NM”.

The pilot may select from three DME tuning modes:

• NAV1 – Tunes the DME frequency from the

selected NAV1 frequency

• NAV2 – Tunes the DME frequency from the

selected NAV2 frequency

• HOLD – When transitioning from NAV1 or NAV2

mode to Hold mode, the DME frequency remains

set to the last selected NAV frequency.

NOTE: When navigating in GPS mode, the

distance displayed is the GPS-derived great-circle

distance, not the actual DME distance.

Figure 2-29 DME Information Window

Radio Tuning Window (optional)

NOTE: The Radio Tuning Window is only available

if a DME radio is installed.

The Radio Tuning Window is displayed by pressing the

DME softkey. This window provides display and control

of the DME radio.

Figure 2-30 Radio Tuning Window

To change the DME mode:

1. From the Radio Tuning Window, turn the

large

FMS

knob to highlight the DME mode ﬁeld.

2. Turn the

small FMS

knob to display the selec-

tion window. Turn the

FMS

knob to select the

desired mode and press the

ENT

key.

Figure 2-31 DME Selection Window

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 363 364

Komentáře k této Příručce

Žádné komentáře

Garmin Legacy Software Versions Uživatelská příručka Strana 49

Komentáře k této Příručce

Související produkty a manuály pro Navigátory Garmin Legacy Software Versions