Garmin Q2 Instalační manuál stáhnout pdf

zūmo 660 Installation Instructions

Mount Your zūmo on the Motorcyle



Warning: Incorrectly wiring the power cable with bare wire leads can result in

damage to the vehicle or the battery and can cause bodily injury. Garmin strongly

recommends having an experienced installer with the proper knowledge of electrical

systems install the unit.

See the Important Safety and Product Information guide in the product box for product warnings

and other important information.

Step 1: Connect Power to the Mount

Select a suitable and secure location to mount the zūmo on your motorcycle, based on

available power sources and safe cable routing.

Cradle

Headphone/audio out jack (3.5 mm)

Microphone jack (2.5 mm)

Mini-USB connector

(for trafc receiever)

Bare wires with

inline fuse for

power connection

Power cable

Step 2: Install the Handlebar Base

The zūmo includes parts for two handlebar installation solutions. Custom mounts can

require additional hardware (www.ram-mount.com).

A) To install the U-bolt and handlebar base:

1. Place the U-bolt around the handlebar, and thread the ends through the handlebar

base.

2. Tighten the nuts to secure the base. Do not overtighten.



note: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.

Handlebar

base

Handlebar

U-bolt

1 2 3 4

Shrnutí obsahu

Strany 1

zūmo 660 Installation InstructionsMount Your zūmo on the MotorcyleWarning: Incorrectly wiring the power cable with bare wire leads can result in dama

Strany 2

B) To install the handlebar base to the clutch/brake clamp bracket:note: Both 1/4 in. standard and M6 bolts are included. Match the size of the facto

Strany 3

Step 4: Attach the Base Plate to the Handlebar Base1. Align the ball of the handlebar base and the ball of the base plate with the double-socket arm.

Strany 4

Mount Your zūmo in an Automobile1. Plug the automotive power cable into the connector on the right side of the cradle. 2. Remove the clear plastic f